Study on the gamma-rays and neutrons energy response optimization of scintillating fiber detector on EAST with Geant4

Targeted design of the thermal neutron shield contained a 1-mm Cd layer outside the magnetic shielding tube and a 5-mm inner Pb layer, which can suppress the height of the output signals caused by thermal neutrons to an ideal level. The adverse effects on the measurement of neutrons above 4 MeV and shielding effect on gamma rays were evaluated as relatively acceptable. In addition, whatever the thermal neutron shield was used and not used, studies of the energy response showed that in both cases the detector had relatively flat sensitivity curves in the fast neutron region, and the intrinsic detection efficiencies of about 40 %.

For gamma rays with not quite high energy (< 8 MeV), the IDEs of the detector were only about 20 %; while for gamma rays with energies below 1 MeV, the response curve cut off earlier in the low-energy region, which was beneficial to avoid counting saturation and signal accumulation.