The data of the article “High-fidelity reception of long-wave timing signals based on Rydberg atoms”

It includes three types of core measured data, which fully correspond to the three sets of core experimental results in the paper. Among them, the Roland pulse group data corresponds to Figure 5 of the paper "Comparison of time-domain signals with odd periods of the original code and even periods of the complement code", which is directly collected and output by an oscilloscope, stored in. csv format, and can be read and viewed through general data analysis software such as MATLAB and Origin; The analysis and processing program corresponding to this data belongs to the self-developed technical content and core technical details of the research group, and is currently not publicly available.

Roland signal data and frequency locked data are both in OPJU format and need to be opened using Origin software: Roland signal data corresponds to Figure 3 "Time and Frequency Domain Analysis of Rydberg Rolan-C Signal" and Figure 4 "Fidelity and Packet Deviation of Rydberg Signal" in the paper, covering the complete measurement results of signal time-domain, frequency-domain characteristics and fidelity, and packet deviation; The frequency locked data corresponds to Figure 2 of the paper, "MTS-EIT Spectral Signal and Frequency Discrimination Signal", which includes the measured data of EIT signal and corresponding frequency discrimination signal under modulation transfer spectrum.